User's Manual
5
4 Connecting to the Hub
Prior to connection with the hub, install the DMSS App on your phone. Make sure that you have
installed the latest version of the App. Interfaces and functions might vary with different added
devices, and the actual interface shall prevail. This manual takes iOS as an example.
●
Make sure that you have already created an account, and added hub to the application.
●
Make sure that the hub has stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go to the hub interface, and then tap to add the siren.
Step 2 Tap to scan the QR code at the bottom of the siren, and then tap
Next
.
Step 3 Tap
Next
after the siren has been found.
Step 4 Follow on-screen instructions and switch the siren to on, and then tap
Next
.
Step 5 Wait for the pairing.
Step 6 Customize the name of the siren, select an area, and then tap
Completed
.