16
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: sales@cop-eu.com | Online: www.cop-eu.com
There are multiple parameters that can be adjusted when confi guring the operating mode of each door.
From the left window pane, right click the door to confi gure and select Door Confi guration
Select the console icon.
Door Door name.
Reader 1 First readers name and direction. Click direction icon to
toggle between enter or exit.
Reader 2 Second readers name and direction. Click direction
icon to toggle between enter or exit.
Status Change operating mode, options are Normal, Always
Open, Always Closed.
Unlock Hold
Interval
The amount of time in seconds that the relay output will
trigger for.
Close Timeout When a door sensor is installed, this is the amount of time
the door must be left open before an overtime event
occurrs.
Holiday
Timezone
A timezone can be confi gured and selected here to
create a specifi c time period where the door will remain
locked such as weekends.
Keep Open
Timezone
A timezone can be confi gured and selected here to
create a specifi c time period where the door will remain
unlocked.
Keep Closed
Timezone
A timezone can be confi gured and selected here to
create a specifi c time period where the door will remain
locked.
Unlock Mode Select the operating mode of the door readers. It is possible to select a single authentication method
supported by the reader or multiple.
Unlock Mode Examples
• Card/Password/Fingerprint would require only one of these methods be used to unlock the
door.
• Card + Password would require that the user fi rst scans their card, then enters their password
before the door would unlock.
Alarm When a door sensor is installed, events can be confi gured to alert the operator of Smart PSS.
Intrusion Event that occurs if the door is forced open.
Overtime Event that occurs if the door is left open.
Duress Event that occurs if a user is under duress.
Door Sensor Select whether a door sensor is installed.
Door Confi guration
To Next Page
Loading...
Need help?
General
