Need help?Do you have a question about the Dahua Technology ASI1212D and is the answer not in the manual?
General| Model | ASI1212D |
|---|---|
| Wiegand | Wiegand 26/34 |
| Input Voltage | 12VDC |
| Communication | TCP/IP, RS-485 |
| Reader Interface | Wiegand, RS-485 |
| Working Temperature | -10°C to 55°C |
| Operating Temperature | -10°C to 55°C |
| Power Supply | 12VDC |
| Working Humidity | 5%–95% (RH), non-condensing |
| Operating Humidity | 5%–95% (RH), non-condensing |
Table mapping cable colors to controller connection types (RS485, Wiegand, power, ground).
Details the pinout and function of Connector 1 for door control and inputs.
Steps to download, install, and register the Dahua toolbox and ACSConfig tool.
How to locate ACS controllers on the network and modify their network configuration via ACSConfig.
Instructions on how to modify IP address, Sub Mask, and Gateway settings on the ASI1212D.
Guide on installing Smart PSS, setting a password, and configuring security questions.
How to input IP address, port, username, and password to add a controller in Smart PSS.
How to create departments and add new user details like ID, name, and card number.
Process for scanning a user's card using an enrolment reader to assign a unique ID.
Step-by-step guide to capture and record a user's fingerprint using a reader.
How to select users from a department and assign them access to specific door lists.
Setting up rules to prevent tailgating or card sharing for enhanced security.
To Next Page
