Dahua Technology ASI1212D User Manual

8
Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: sales@cop-eu.com | Online: www.cop-eu.com
Both ACS controllers and the ASI1212D can be programmed via the Smart PSS software. If Smart PSS is not currently installed on the
PC then this can be installed using Dahua Toolbox.
When fi rst opening SmartPSS, the software will prompt for a password to be created, this password is used for logging into the
software only and is not the password of the controller.
It is important to keep this password safe as failure to remember the password will result in not being able to run the SmartPSS
software. The second step is to fi ll out the security questions and answers, they are used to reset the password if it is forgotten.
Once a password has been confi gured, login using the chosen password, the default username is admin.
From the home screen select the Devices option.
Smart PSS Initialisation
CONFIGURATION VIA SMART PSS

Dahua Technology ASI1212D Specifications

General

Brand	Dahua Technology
Model	ASI1212D
Category	IP Access Controllers
Language	English