EasyManuals Logo

Dahua Technology DH-XVR4116HS-I User Manual

Dahua Technology DH-XVR4116HS-I
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #233 background imageLoading...
Page #233 background image
Users Manual
224
Parameter
Description
Report Alarm
Select the
Report Alarm
checkbox to enable the system to upload the
alarm signal to the network (including alarm center) when an alarm
event occurs.
Not all models support this function.
The corresponding parameters in the alarm center should be
configured. For details, see "5.15.1.12
Configuring Alarm Center
Settings."
Send Email
Select the
Send Email
checkbox to enable the system to send an email
notification when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main
Menu > NETWORK > Email
.
Record Channel
Select the channel(s) that you want to record. The selected channel(s)
starts recording after an alarm event occurs.
The recording for intelligence event and auto recording function must be
enabled. For details, see "5.1.4.9
Configuring Recorded Video Storage
Schedule" and "5.9.1 Enabling Record Control."
PTZ Linkage
Click
Setting
to display the PTZ page.
Enable PTZ linkage actions, such as selecting the preset that you want to
be called when an alarm event occurs.
To use this function, the PTZ operations must be configured. For details,
see "5.4 Controlling PTZ Cameras."
Post Record
Set a length of time for the Device to delay turning off recording after
the alarm is cancelled. The value ranges from 10 seconds to 300 seconds.
Tour
Select the
Tour
checkbox to enable a tour of the selected channels.
To use this function, the tour setting must be configured."
After the tour is ended, the live view screen returns to the view layout
before tour started.
Picture Storage
Select the
Picture Storage
checkbox to take a snapshot of the selected
channel.
To use this function, make sure the snapshot function is enabled for
Intel
in
Main Menu > STORAGE > Schedule > Snapshot
.
Video Matrix
Select the checkbox to enable the function. When an alarm event occurs,
the video output port outputs the settings configured in
Main Menu >
DISPLAY > TOUR > Extra Screen
.
Not all models support this function.
The extra screen must be enabled to support this function.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua Technology DH-XVR4116HS-I and is the answer not in the manual?

Dahua Technology DH-XVR4116HS-I Specifications

General IconGeneral
BrandDahua Technology
ModelDH-XVR4116HS-I
CategoryDVR
LanguageEnglish

Related product manuals