User’s Manual
304
5.18.4 Configuring Record
Record type includes auto and manual record. You can configure record type of main stream and sub
stream. See "5.7 Configuring Record Settings".
5.18.5 Configuring Advance Settings
Create HDD group, and save main stream, sub stream and snapshot of designated channels to the
HDD group.
If the page displays that "Current HDD Mode is Quota Group", click "Change to HDD Group Mode",
and then configure HDD group.
You can enable either HDD Group Mode or Quota Group. The system prompts to reboot the
device each time when you switch the mode.
Select Main Menu > STORAGE > Disk Group > Disk Group.
Disk group
Select group for each HDD, and then click Apply to complete the settings.
After configuring HDD group, click Main Stream, Sub Stream and Snapshot tabs respectively,
to configure the saving of main stream, sub stream and snapshot information of different
channels to different HDD groups.
To Next Page
Loading...
Need help?
General
