User’s Manual
268
5.15.1.3 Configuring Wi-Fi Connection Settings
You can make wireless connection between the Device and the other devices in the same network
through Wi-Fi settings, facilitating the devices connection and mobility.
Only the Device with Wi-Fi module supports this function.
Select Main Menu > NETWORK > Wi-Fi.
Wi-Fi
Configure the settings for the Wi-Fi connection parameters.
Table 5-47 Wi-Fi connection parameters
Connect
Automatically
Enable
.
After the Device is restarted, it will automatically connect to the nearest
hotspot that had been connected successfully.
Refresh
Refresh the hotspot list. The self-
adaption function such as adding
password is supported if such setting was once configured.
Connect
In the hotpots list, select a hotspot, and then click
.
To reconnect the same hotspot, disconnect first and then reconnect.
To connect to other hotspot, disconnect from the current connected
hotspot first, and then connect to the other hotspot.
Disconnect To disconnect from a hotspot, click
.
Click Apply to complete the settings.
To Next Page
Loading...
Need help?
General
