10
7 Accessing the DVR via the Web
The DVR can be accessed directly from the Internet Explorer Web browser. The Web Interface allows
you to set parameters, configure inputs and outputs, set recording options, view live camera images,
and review recorded video.
Note: Different devices may have different Web interfaces, the figures below are for reference only,
and may not represent the Web Interface for your device.
1. Launch Internet Explorer and type the DVR’s IP address in the address bar. Internet Explorer
opens the Login page.
2. Click Yes to install webrec.cab when the system displays the installation prompt. (Note: If you
receive an error that the computer cannot download the ActiveX file, please modify the security
settings in Internet Explorer to accept ActiveX downloads.)
3. Type the Username and Password for the device.
Then, click Login. The default Username and
Password “admin”.
Note: For security reasons, modify your password after your first login.
Figure 8-1
To Next Page
Loading...
Need help?
General
