Dahua Technology XVR Cooper Series - Page 147

Local Configurations 131
Figure 5-97
Click Apply to save the settings. Step 6
 If you have configured the snapshot schedule, the configuration has been
completed.
 If you have not configured the snapshot schedule, see "5.1.4.10 Configuring
Snapshot Storage Schedule."
5.8.1.2 Configuring Event Triggered Snapshot
Select Main Menu > CAMERA > ENCODE > Snapshot. Step 1
The Snapshot interface is displayed.
In the Mode list, select Event, and then configure other parameters. See Figure 5-98. Step 2