HDCVI Standalone DVR User’s Manual
Latch: Here you can set corresponding delaying time. The value ranges from 1s-300s.
System automatically delays specified seconds in turning off alarm and activated
output after external alarm cancelled.
Attempt(s): It is to set login attempt times. Once the login attempt exceeds the
threshold you set here, current account will be locked. This function is for illegal login
only.
Lock time: It is to set account lock time once its login attempt has exceeded the
threshold you set. This function is for illegal login only.
Show message: system can pop up the message in the local screen to alert you
when an alarm occurs.
Alarm upload: System can upload the alarm signal to the network (including alarm
centre) if you enabled current function. For disconnection event, IP conflict event
and MAC conflict event, this function is null.
Send email: System can send out email to alert you when an alarm occurs.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm
occurs.
Log: Check the box here, system can record network event log.
Voice prompts: Check the box here to trigger audio broadcast function. You can
select specified audio file here. System can play the audio file once the
corresponding event occurs.
Figure 4-120
To Next Page
Loading...
