HDCVI Standalone DVR User’s Manual
output.
On the preview interface of the channel 1, right click mouse and then select channel 3,
you can overlay video from channel 3 on the channel 1. See Figure 4-18 and Figure
4-18.
Figure 4-18
Figure 4-19
Go to the 1-winode mode, on the navigation bar, click , you can see the video on the
large window and the video from the next channel is the default video on the small window.
If you have set PIP function, you can click to view the last edited PIP video.
4.5.3 PTZ Control
The PTZ setup is shown as in See Figure 4-20.
Please note the commend name is grey once device does not support this function.
To Next Page
Loading...
