HDCVI Standalone DVR User’s Manual
① Insert the key to the hole on the front panel.
③ Insert the HDD to the clip and adjust the handle
of the HDD to secure it.
④ Put the front panel back and then use the key to
secure the front panel.
HDD Handle Installation
① Line up the one side of the handle to the
HDD (The side of no port)
② Use screwdriver to fix the handle on the
HDD.
3.4 Rack Installation
The DVR occupies 1.5U/2U rack units of vertical rack space.
Use twelve screws to fix the unit
Please make sure the indoor temperature is below 35℃ (95°f).
Please make sure there is 15cm (6 inches) space around the device to guarantee
sound ventilation.
Please install from the bottom to the top.
If there are more accessories connected in the rack, please take precaution
measures in case the rack power is overload.
To Next Page
Loading...
