HDCVI Standalone DVR User’s Manual
①Loosen the screws of the upper
cover and then remove the cover.
②Fix the HDD on the bracket. If
you want to install the HDD on the
bottom bracket, you need to
remove the top bracket first.
③Connect one end of the HDD
data cable to one HDD.
④ Connect the other end of the
HDD data cable to the mainboard.
⑤Connect the power cable to
the HDD.
⑥Put the cover back and then fix.
Important:
If the HDD amount is less than four, you do not need to install the HDD bracket.
When there is a bracket, please make sure the installation direction of HDDs is the same.
3.3.2.3 3U series
① Remove the HDD box from the device.
②Put the HDD to the box and then use the screws to secure.
③ Insert the HDD box to the device. Please make sure
the HDD box handle is up in case it collides with the front
panel.
④ After you inserted the HDD box, put the handle back.
3.3.2.4 Removable Case
1. Loosen the screws of the
upper cover.
To Next Page
Loading...
