HDCVI Standalone DVR User’s Manual
Aux
Click , system goes to the following interface. The options here are defined by the
protocol. The aux number is corresponding to the aux on-off button of the decoder. See
Figure 4-30.
Figure 4-30
4.5.4 Auto Focus
It is to set auto focus function. Please make sure the camera supports this function.
4.5.5 Color
This function is for one-channel mode only.
Here you can set hue, brightness, contrast, saturation, gain, white level, color mode
and etc. See Figure 4-31.
Figure 4-31
To Next Page
Loading...
