HDCVI Standalone DVR User’s Manual
Figure 4-128
Figure 4-129
4.11.4.1.1.1 Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1,
click Copy button, you can go to interface Figure 4-130. You can see current channel
name is grey such as channel 1. Now you can select the channel you wan to paste such
as channel 5/6/7. If you want to save current setup of channel 1 to all channels, you can
click the first box “ALL”. Click the OK button to save current copy setup. Click the OK
button in the Encode interface, the copy function succeeded.
To Next Page
Loading...
