Dahua DH-HCVR5424L-S2 - Page 208

HDCVI Standalone DVR User’s Manual
198
Figure 4-163
4.11.5.3 Video Matrix
Here you can set matrix output channel and its interval. You can set HDMI2 port tour
and its interval See Figure 4-164.
 Enable tour: Check the box here to enable this function.
 Interval: Input proper interval value here.
 Resolution: The resolution of the tour window. Please note this function is for HDMI
only.
 Split: You can select window split mode from the dropdown list. For BNC, it supports
1-split mode only. For HDMI, it supports 1/4/9/16-split mode.
 Add: Under specified window split mode, click it to add channel group. See Figure
4-165.
 Modify: Double click a channel or select a channel and then click Modify button, you
can change current channel setup. See Figure 4-166.
 Delete: Click it to remove selected channel group.
 Move up: Click it to move current selected channel up.
 Move down: Click it to move current selected channel down.
 Default: Click it to restore default setup.