HDCVI Standalone DVR User’s Manual
Username: default. Password: default (hidden user). Hidden user “default” is for
system interior use only and can not be deleted. When there is no login user, hidden
user “default” automatically login. You can set some rights such as monitor for this
user so that you can view some channels without login.
Figure 4-6
Important
For security reason, please change factory default password after you first login.
Continuous three times login failure will result in system alarm and five times login
failure will result in account lock!
Please reboot the device or wait for 30 minutes if your account has been locked. You
can go to main menu->Setting->Event->Abnormality->Network->Illegal login to set
customized account lock time.
After input corresponding user name and password, you can click OK button. System
goes to the startup wizard.
When there are all analog channels, the startup wizard includes general, encode,
schedule, record control and network.
When there is an IP channel, the startup wizard includes general, network, remote
device and schedule.
Click OK button, you can go to General interface. See Figure 4-7.
For detailed information, please refer to chapter 4.11.5.1.
To Next Page
Loading...
