III. Configuring Images
The monocular passenger flow system comprises traditional bullet cameras and can also be
used as a traditional camera system for surveillance. In outdoor and angle-mounting applications
where the monocular passenger flow system is installed, you likely have to handle backlight and low
luminance scenarios, so an additional section is dedicated to image adjustment in this situation.
Stereo vision passenger flow devices typically need not adjust the image effect.
1. Upgrade to the latest general program before configuration. On GDP (gdp.dahuatech.com),
choose the correct Program Type according to model numbers: Baseline, general patches, and
then download the latest programs.
2. Set up different parameters for different scenarios in configuration. Some scenarios need two
configuration plans to show the effect. In this case, switch between the configurations by time. See
the following figure:
3. Like traditional cameras, angle-mounting passenger flow cameras can be used for surveillance.
To this end, adjust the image quality. The default settings are enough to handle common scenarios;
Adjust the Exposure first. See the following figure:
Adjust the Picture parameters for more refined details.
To Next Page
Loading...
Need help?
General
