IV. Function Config
8341 Stereo Vision Camera
The system counts the passenger flow into and out of the detected region. When the counted
passenger flow exceeds the preset alarm-triggered quantity, an alarm is triggered, followed by linked
settings.
1. Enable Smart Plan
The passenger flow function of the device becomes effective only after the smart plan is enabled.
Step 1 Select Setup > Event > Smart Plan.
The Smart Plan interface is displayed. See Figure 3-1.
Figure 3-1 Smart plan
Click the selected smart plan.
Click Save to complete the configurations.
2. People Counting
The system provides two counting methods: Region people counting, people counting.
Region People Counting
Use Region People Counting to set up a closed region. The system counts the passenger flow
into and out of the region. When the counted passenger flow exceeds the preset alarm-triggered
quantity, an alarm is triggered.
Select Setup > Event > People Counting.
The People Counting interface is displayed. See Figure 3-2.
To Next Page
Loading...
Need help?
General
