EasyManua.ls Logo

Dahua DHI-ASR2101A - User Manual

Dahua DHI-ASR2101A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Card Reader
User's Manual
V1.0.2
Question and Answer IconNeed help?

Do you have a question about the Dahua DHI-ASR2101A and is the answer not in the manual?

Dahua DHI-ASR2101A Specifications

General IconGeneral
BrandDahua
ModelDHI-ASR2101A
CategoryCard Reader
LanguageEnglish

Summary

Foreword

General Information

Introduces the manual's purpose, scope, and general guidance for using the Card Reader.

Safety Instructions

Explains signal words (DANGER, WARNING, CAUTION, TIPS, NOTE) used for hazard communication.

Privacy Protection Notice

Advises compliance with privacy laws when collecting personal data, mentioning surveillance and contact information.

Important Safeguards and Warnings

Transportation and Storage Requirements

Specifies conditions for transporting and storing the Card Reader under allowed environmental parameters.

Installation Requirements

Details safety guidelines and specific requirements for installing the Card Reader correctly.

Operation Requirements

Outlines necessary checks and conditions for operating the Card Reader safely and within specifications.

1 Introduction

1.1 Product Features

Lists the key features and capabilities of the Card Reader, noting variations by model.

1.2 Device Appearance

Describes the different physical models of the Card Reader: 86 box, slim, and fingerprint.

1.2.1 86 Box Model Dimensions

1.2.2 Slim Model Dimensions

1.2.3 Fingerprint Model Dimensions

2 Ports Overview

3 Installation

3.1 Installing the 86 Box Model

Provides step-by-step instructions and diagrams for mounting the 86 box model of the Card Reader.

3.2 Installing the Slim Model

3.3 Installing the Fingerprint Model

4 Configuring Bluetooth Card Reader

5 Sound and Light Prompt

5.1 86 Box and Slim Models

Describes the sound and light indicators for the 86 box and slim models during various operations.

5.2 Fingerprint Model

Details the sound and light indicators for the fingerprint model during various operations.

6 Unlocking the Door

7 System Updates

7.1 Updating via SmartPSS Lite

Provides instructions for updating the Card Reader firmware using SmartPSS Lite software.

7.2 Updating via Config Tool

Details the process for updating the Card Reader firmware using the Config Tool.

Appendix 1 Cybersecurity Recommendations