6 P2P
Step 1 Use cell phone to scan the client QR code and download the APP. See Figure 6-1.
Note
There are two ways to get QR code.
Refer to the device package box to get the cell phone client QR code.
Login the device local menu, and from main menu->Setting->Network->P2P, or login the WEB,
from Setup->Network->TCP/IP->P2P to get the client QR code and the device SN QR code.
Figure 6-1
Step 2 After installation, run the APP and then select Live preview to go to the main interface. Add the
device via the cell phone.
1) Tap and then tap Device Manager. See Figure 6-2.
Figure 6-2
To Next Page
Loading...
Need help?
General
