Network Configuration 4
After clicking Search setting, please enter the username and password, and please
make sure they are the same as what you set during initialization, otherwise there will
be "wrong password" notice.
Select the devices which IP addresses need to be modified, and then click Modify IP.
The Modify IP Address interface is displayed. See Figure 2-3.
Modify IP Address interface
Select Static mode and enter start IP, subnet mask and gateway.
IP addresses of multiple devices will be set to the same if you select Same IP.
If DHCP server is available in the network, devices will automatically obtain IP
addresses from DHCP server when you select DHCP.
Click OK.
2.3 Logging in Web Interface
Open IE browser, enter the IP address of the device in the address bar and press
Enter.
If the setup wizard is displayed, follow the instructions to finish the settings.
Enter user name and password in the log in box, and then click Login.
For first time login, click Click Here to Download Plugin and install the plugin as
instructed.
The main interface is displayed when the installation is finished. See Figure 2-4.
To Next Page
Loading...
Need help?
General