Need help?Do you have a question about the Dahua XVR SERIES and is the answer not in the manual?
General| Video Compression | H.265; H.264 |
|---|---|
| Audio Compression | G.711A; G.711U |
| Backup Mode | USB, Network |
| Network Protocol | HTTP; DHCP; DNS; DDNS; SMTP; NTP; UPnP; SNMP |
| Category | Digital Video Recorder |
| Series | XVR |
| Video Input | Analog |
| Video Output | HDMI, VGA |
| Recording Resolution | Up to 8MP |
| Network Interface | RJ45 10M/100M |
| Operating Temperature | -10°C to +55°C (+14°F to +131°F) |
| Operating Humidity | 10% to 90% |
| Hard Drive Capacity | Up to 10TB |
Introduces the Quick Start Guide and thanks the user for purchasing the DVR.
Outlines essential safety precautions for device operation, installation, and handling to prevent hazards.
Defines the meaning of signal words like CAUTION and NOTE used in the guide for risk indication.
Clarifies that the guide is general and actual product features may vary; designs are subject to change.
Covers unpacking accessories and verifying all DVR components are present and undamaged.
Guides the user through the process of installing a hard disk drive into the DVR for storage.
Explains how to connect the DVR to a display and power it on for initial operation.
Illustrates and lists the various ports available on the rear panel of the DVR for connectivity.
Guides through initial DVR setup, including password, unlock pattern, and security questions.
Explains how to register and add remote devices, such as cameras, to the DVR system.
Details how to set up the recording schedule for different channels and recording modes.
Describes how to search, view, and play back recorded video footage from the DVR.
Covers setup for P2P connectivity, enabling remote access via mobile clients or platforms.
Guides the user on how to access the P2P configuration interface on the DVR.
Provides instructions on connecting the DVR to a cell phone client using P2P for remote monitoring.
Explains how to properly log out, reboot, or shut down the DVR system.
Details the process of logging into the DVR's web interface using a browser.
To Next Page
