Need help?Do you have a question about the Dahua XVR5104C-S2 and is the answer not in the manual?
General| Operating System | Embedded LINUX |
|---|---|
| Video Output | 1 HDMI, 1 VGA |
| Audio In/Out | 1/1 |
| Two-way Talk | Yes |
| Record Mode | Manual, Schedule, Motion Detection |
| OSD | Yes |
| Compression | H.264 |
| Smart Phone | iOS, Android |
| Channels | 4 |
| Video Input | 4 Channel |
| Resolution | 1920×1080, 1280×1024, 1280×720, 1024×768 |
| Display Split | 1/4 |
| Network Interface | RJ-45 (10/100M) |
| Internal HDD | 1 SATA (up to 6TB) |
| USB Interface | 2 USB 2.0 |
| Power Supply | 12V DC |
| Power Consumption | <10W (without HDD) |
| Working Environment | -10°C ~ +55°C |
| Dimensions | 220mm |
| Weight | 1.2 kg |
| Bit Rate | 32Kbps to 8Mbps |
Lists the key features of the standalone series DVR product.
Details the technical specifications for various DVR series models, including system, video, audio, and hard disk parameters.
Provides information about the front panel of the DVR series, including indicator lights and buttons.
Detailed steps and important notes for installing hard disk drives (HDDs) into the DVR.
Guides on connecting BNC, VGA, and HDMI video inputs and outputs for surveillance.
Details on connecting alarm input and output ports, including specifications and wiring.
Guides users through the initial setup process, including boot-up, device initialization, and password protection.
Guide to setting up the device for the first time, including password and login procedures.
Provides troubleshooting solutions for common issues like DVR booting problems, login failures, and video distortions.
To Next Page