Dahua XVR5104C-S2 - Preview Control

331
system date, time, channel name and window number. If you want to change system
date and time, please refer to general settings (Main
Menu->Setting->System->General). If you want to modify the channel name, please
refer to the display settings (Main Menu->Camera->CAM name)
Figure 4- 46
SN
Icon
Function
1
When current channel is recording, system displays this icon.
2
When motion detection alarm occurs, system displays this icon.
3
When video loss alarm occurs, system displays this icon.
4
When current channel is in monitor lock status, system displays this
icon.
Tips
Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2,
release mouse you can switch channel 1 and channel 2 positions.
4.2.2 Preview Control
The preview control function has the following features.
 Support preview playback.