Need help?Do you have a question about the Dahua ipc-hdbw2300r-z and is the answer not in the manual?
General| Camera Type | Dome |
|---|---|
| Scanning System | Progressive |
| Backlight Compensation | BLC/ HLC/ DWDR |
| White Balance | Auto/Manual |
| Gain Control | Auto/Manual |
| Privacy Masking | Up to 4 areas |
| IR On/Off Control | Auto/ Manual |
| Max. User Access | 20 users |
| Power Supply | DC12V, PoE (802.3af) |
| Ingress Protection | IP67 |
| Vandal Resistance | IK10 |
| S/N Ratio | >50dB |
| Focus Control | Auto |
| Bit Rate | 32Kbps~10Mbps |
| Video Compression | H.264/ MJPEG |
| Noise Reduction | 3D |
| IR Distance | 30m |
| Ethernet | RJ-45 (10/100Base-T) |
| Network Interface | 1 RJ45 10M/100M self-adaptive Ethernet interface |
| Protocol | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, SMTP, NTP, UPnP, SNMP, QoS, IPv6, Bonjour |
| Compatibility | ONVIF, CGI, PSIA |
| Smart Phone | Android |
| Working Environment | -30°C ~ +60°C |
Ensure installation and operation comply with local electrical safety codes for SELV and limited power sources.
Avoid heavy stress, violent vibration, or water splash during transportation, storage, and installation.
Do not apply power before installation completion; use proper power cut-off devices.
Examination and repair work must be performed by qualified service engineers only.
Install in a cool, dry place away from sunlight, flammable items, and electromagnetic radiation.
Shut down device before maintenance; use soft cloth and mild detergent for cleaning.
Use manufacturer-recommended accessories and check package contents before installation.
Details the physical parts of the network camera, including the dome body and enclosure.
Provides dimensional information and diagrams for the camera's physical structure.
Explains how to configure alarm input and output connections and functions.
Step-by-step guide for mounting the camera, including using the position map and securing the device.
Instructions for inserting and securing a Micro SD card for storage.
Details how to adjust the zoom and focus of the camera lens after installation.
Introduces the tool for searching and modifying IP addresses and upgrading the device.
Guides users on using the configuration tool to manage device network settings and login.
Steps to connect the network camera to the network and configure PC settings.
How to access the camera's web interface, login, and navigate the main monitoring window.
To Next Page