Dahua LDH SAI200 Series - Logging in System; Operating Quick Tool Bar

Basic Operations 21
Main menu
Figure 4-2
Logging in System
4.3
The system will be locked automatically under each of the following conditions:
 Plug the Signage’s power line into a socket (or turn on the Signage with your remote
control).
 Do not operate the device for the time you have set.
 Lock the screen manually.
You need to type your password to unlock the system.
Click any position on the screen.
Step 1
The Login interface is displayed. See Figure 4-3.
The login interface
Figure 4-3
Type your password.
Step 2
Click Save.
Step 3
The main menu or the interface before the system is locked is displayed.
Operating Quick Tool Bar
4.4
Move your pointer to the bottom of any an interface to display the quick tool bar. See Figure 4-4
and Table 4-1 for details.
Quick tool bar
Figure 4-4
Table 4-1 Description of quick tool bar