Dahua LDH SAI200 Series - Configuring Auto Reboot Time; Upgrading System

Remote Control 37
The rebooting now interface
Figure 6-2
Click Confirm and system reboots.
Step 3
Configuring Auto Reboot Time
6.4
Configure an auto reboot time for your device. And your device will reboot at a fixed time every
day.
In main menu, select Settings > Maintenance and Upgrade.
Step 1
The Maintenance and Upgrade interface is displayed.
Click Auto Maintenance Time Setting.
Step 2
The Auto Maintenance Time Setting interface is displayed. See Figure 6-3.
The auto maintenance time setting interface
Figure 6-3
Drag your mouse up and down to select a time. Click any position out of the Auto
Step 3
Maintenance Time Setting interface to finish configuration.
Upgrading System
6.5
Preparation
Insert an USB with the upgrade package into your device. Contact our customer service center
to get an upgrade package.
Procedure
In main menu, select Settings > Maintenance and Upgrade.
Step 1
The Maintenance and Upgrade interface is displayed.
Click System Upgrade.
Step 2
The System Upgrade interface is displayed. See Figure 6-4.
D or E represents your USB.