Dahua LDH SAI200 Series - 6 System Maintenance; Maintenance Requirements; Modifying Password; Rebooting Your Signage

Remote Control 36
6 System Maintenance
Maintenance Requirements
6.1
It is recommended to:
 Modify the user password every three months.
 Reboot this device regularly.
 Upgrade firmware regularly.
Modifying Password
6.2
For system security, regularly change the password and adopt the strong password. Keep the
password properly after your modification.
In main menu, select Settings > Password Setting.
Step 1
The password setting interface is displayed. See Figure 6-1.
The password setting interface
Figure 6-1
Type old password, new password. Then type your new password again to confirm it.
Step 2
Click Save.
Step 3
Rebooting Your Signage
6.3
Manually reboot your device to handle problems such as system non-fluency.
In main menu, select Settings > Maintenance and Upgrade.
Step 1
The Maintenance and Upgrade interface is displayed.
Click Reboot Now.
Step 2
The Reboot Now interface is displayed. See Figure 6-2.