Dahua LDH SAI200 Series - Restoring Your Signage to Factory Settings

Remote Control 38
The system upgrade interface
Figure 6-4
Select an upgrade package to start upgrade.
Step 3
After being upgraded, your device reboots.
Restoring Your Signage to Factory Settings
6.6
Restore your device to factory settings to handle problems such as storage insufficiency and
system error. Be cautious because this may cause data lose.
In main menu, select Settings > Maintenance and Upgrade.
Step 1
The Maintenance and Upgrade interface is displayed.
Click Restore Factory Defaults.
Step 2
The Restore Factory Defaults interface is displayed. See Figure 6-5.
The restore factory defaults interface
Figure 6-5
Click Confirm to begin this operation.
Step 3
After that, your system will reboot.