Dahua N42BJ62 - Cables and Connectors

2
Cables and Connectors
 Cable type might vary with device.
 Waterproof all cable joints with insulating and waterproof tape to avoid short circuit and
water damage.
Ref. Port Name Connector Description
1 Network Port RJ-45
Connect to standard Ethernet cable.
Note: Certain devices support Power over Ethernet.
Check the specific device to determine if the device
accepts PoE and use an appropriate Ethernet cable
and network to supply power.
2 Power
Power port. Input 12 VDC power supply.
Use in accordance with device label instructions.