Need help?Do you have a question about the Dahua NVR2-P Series NVR2208-P8 and is the answer not in the manual?
General| Model | NVR2208-P8 |
|---|---|
| Category | Network Video Recorder |
| Max IP Camera Inputs | 8 |
| Video Compression | H.265/H.264 |
| HDD Bays | 1 |
| Max HDD Capacity | 10TB |
| Weight | 1.5kg |
| Incoming Bandwidth | 80Mbps |
| Operating Temperature | -10°C to +55°C |
| Channel Input | 8 |
| Storage Capacity | Up to 10TB |
| Network Interface | 1 RJ-45 port (10/100/1000 Mbps) |
| PoE Ports | 8 |
| Video Output | 1 HDMI, 1 VGA |
| Max Resolution | 8MP (3840×2160) |
| Recording Resolution | Up to 8MP |
Lists general features like camera connectivity and stream types.
Details features for local display and monitoring.
Outlines features related to Hard Disk Drive management.
Covers various recording and playback functionalities.
Features for exporting and managing backup devices.
Covers alarm handling and system exceptions.
Details network connectivity and remote access features.
Provides instructions for properly powering on and off the NVR.
Guides through the initial setup wizard for basic NVR configuration.
Steps to search for and add IP cameras connected to the network.
How to modify IP camera settings and configure custom protocols.
Instructions for managing cameras connected via PoE interfaces.
Details mouse controls for navigating and operating in live view.
How to customize live view output, dwell time, and camera order.
How to configure parameters for PTZ camera control.
Steps to set specific preset locations for PTZ cameras.
How to set image quality, resolution, and stream types for recording.
How to set up schedules for automatic recording of cameras.
Setting up recording triggered by motion detection events.
Configuring recording triggered by alarm inputs.
How to play back recorded video for a specific channel.
Searching and playing back video based on specified time duration.
Playing back files found using normal video search criteria.
Searching and playing back video based on event types like alarm or motion.
Quickly exporting record files to a backup device.
Backing up files found via normal video search.
Backing up event-related record files using search criteria.
Configuring motion detection parameters and alarm actions.
Setting up handling methods for external sensor alarms.
Configuring alarms and actions for video loss detection.
Setting up detection and alarms for video tampering events.
Defining actions like full screen monitoring or audible warnings upon alarm.
Setting up basic network parameters like IP address and DNS.
Steps to initialize a newly installed Hard Disk Drive (HDD).
To Next Page