User Manual of NVR2XXX(-P4-P8) Series NVR
166
13.3 Configuring More Settings for Device
Parameters
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 13. 3.
Figure 13. 3 More Settings Interface
3. Configure the following settings:
• Device Name: Edit the name of NVR.
• Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and
the default No. is 255. The number is used for the remote and keyboard control.
• Operation Timeout: Set timeout time for menu inactivity. E.g.,when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after 5
minutes of menu inactivity.
• Menu Output Mode: You can choose the menu display on different video output.
4. Click the Apply button to save the settings.
To Next Page
Loading...
Need help?
General
