182
Click to select corresponding window-split mode and output channels.
4.3.2.4 Previous screen/next screen
Click to go back to the previous screen, click to go to the next screen.
4.3.2.5 Tour
Click button to enable tour, the icon becomes , you can see the tour is in process.
Note
Close the tour or the triggered tour operation has cancelled, device restore the previous preview video.
4.3.2.6 PTZ
Click , system goes to the PTZ control interface. Please refer to chapter 4.4.2 PTZ for detailed
information.
4.3.2.7 Color
Click button , system goes to the color interface. Please refer to chapter 4.3.6.1 Color for detailed
information.
Please make sure system is in one-channel mode.
4.3.2.8 Image
Click to go to the image interface. Please refer to chapter 4.2.4 Image for detailed information.
Please make sure system is in one-channel mode.
4.3.2.9 Search
Click button , system goes to search interface. Please refer to chapter 4.6.2 Search for detailed
information.
4.3.2.10 Broadcast
Click to go to broadcast interface. Select a group name and then click to begin
broadcast. Please refer to chapter 4.10.5 Broadcast for detailed information.
4.3.2.11 Alarm Status
Click button , system goes to alarm status interface. It is to view device status and channel status.
Please refer to chapter 4.10.2.3.1 Alarm status for detailed information.
4.3.2.12 Channel Info
Click button , system goes to the channel information setup interface. It is to view information of the
corresponding channel. See Figure 4-62.
To Next Page
Loading...
