286
Figure 4-178
Here we use cell phone APP to continue.
Step 1 Use cell phone to scan the QR code and download the APP.
Step 2 After installation, run the APP and Live Preview, enter the main interface. Now you can add
device to the APP.
1. Open App; tap to go to the Live preview.
2. Tap at the top left corner, you can see the main menu.
3. Tap Device manager button, you can use several modes (P2P/DDNS/IP and etc.) to add
the device. Click to save current setup. Tap Start Live preview to view all-channel
video from the connected device. See Figure 4-179.
To Next Page
Loading...
