User's Manual
152
A preset will be added for this tour.
●
You can repeat adding more presets.
●
Click
Delete Preset
to delete the preset for this tour. This operation can be repeated to
delete more presets. Some protocols do not support deleting.
5.6.7.3.3 Configuring Patterns
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the
Pattern
tab.
Figure 5-44 Pattern
Step 3 In the
Pattern
box, enter the value for pattern.
Step 4 Click
Start
to perform the directions operations. You can also go to the PTZ Control Panel
to perform the operations of adjusting zoom, focus, iris, and directions.
Step 5 On the
PTZ
window, click
End
to complete the settings.
5.6.7.3.4 Configuring AutoScan
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the
Scan
tab.
To Next Page
Loading...
Need help?
General
