Local Basic Operations 112
4.4.4.3 Calling Patterns
Step 1 On the Expanded PTZ Control Panel, in the No. box, enter the value of the pattern that
you want to call.
Step 2 Call to call the pattern.
The PTZ camera moves according to the configured pattern repeatedly.
Step 3 Click again to stop calling the pattern.
4.4.4.4 Calling AutoScan
Step 1 On the Expanded PTZ Control Panel, in the No. box, enter the value of the border that
you want to call.
Step 2 Click .
The PTZ camera performs scanning according to the configured borders.
Step 3 Click again to stop auto scanning.
4.4.4.5 Calling AutoPan
Step 1 On the Expanded PTZ Control Panel, click to start moving in horizontal direction.
Step 2 Click again to stop moving.
4.4.4.6 Using AUX Button
On the Expanded PTZ Control Panel, click , the AUX setting interface is displayed. See
Figure 4-91.
In the Direct Aux list, select the option that corresponds to the applied protocol.
In the Aux Num box, enter the number that corresponds to the AUX switch on the decoder.
Figure 4-91
4.5 Record File
Device adopts 24-hour continuous record by default. It supports customized record period and
record type. Refer to "4.1.4.6 Schedule" for detailed information.
4.6 Playback and Search
To Next Page
Loading...
Need help?
General