Dahua PFH610V-IR - Page 10

5
interface has “External Light Setting” and “Wiper Setting”.
 Choose corresponding control mode according to different camera types.
 “N/C”, “NO/C” and “OUT/G” interfaces of the camera have the same functions. Different types
of devices display in a different way.
 Regarding a camera with RS485 control function, “PTZ Setting” shall be adjusted to “Default”
status.
 Protective housing of white light doesn’t support remote mode 2.
Please don’t connect NO/C or OUT/G interface with IR/G interface, or the IR light will be damaged.
Figure 2-3 Wiring Diagram of IPC Interface (Remote Mode 1)