Dahua Pro Series User Manual

General Configuration 5
Email Address
In order to reset password, input email address properly and update in
time.
Click Save to finish initialization.
Step 3
Modifying IP Address 3.2
In order to make the camera get access to network, please plan IP address reasonably
according to the actual network environment.
Log in camera web interface in the IE browser. Step 1
 The factory default IP address is: 192.168.1.108.
 The default user is admin; the password is set during device initialization.
Select Setup > Network > TCP/IP and the system will display the interface of “TCP/IP”, Step 2
which is shown in Figure 3-2.
TCP/IP Figure 3-2
Configure relevant info of IP address, and click Save. Step 3
Live Video 3.3
Different devices might have different WEB interfaces, the figure in this document is just for
reference, please refer to the document WEB Operation Manual in the disk and the actual
interface for more details.
Log in camera web interface in the IE browser. Step 1
 IP address is the one which has been modified.
 Default user is admin; the password has been set during device initialization.
Click Login and the system will display the WEB main interface, which is shown in Step 2
Figure 3-3.

Dahua Pro Series Specifications

General

Operating Temperature	-30 °C to +60 °C (-22 °F to +140 °F)
Lens Type	Fixed or varifocal options available
Weatherproof Rating	IP67
Audio	Built-in microphone and/or audio input/output
Smart Features	Intrusion
Power Supply	12V DC, PoE (802.3af/at) (depending on model)
Image Sensor	1/2.5" CMOS
IR Distance	Up to 30m (varies by model)
Video Compression	H.265/H.264
Wide Dynamic Range (WDR)	120 dB
Intelligent Video System (IVS)	Tripwire, Intrusion
Ethernet	RJ-45 (10/100Base-T)
Ingress Protection	IP67
Storage	Micro SD card slot (up to 256 GB)
Resolution	Up to 8MP (4K)
Max. Resolution	3840 x 2160 (8MP)