4 Quick Configuration
After configuration is complete, you have completed the connection between VTO and VTH,
and you may start video talk.
4.1 Process
Step 1. In device homepage, select Settings>Project Settings.
Step 2. Enter project password (default password is 002236).
See Figure 4- 1.
Figure 4- 1
Step 3. VTH set.
If the VTH is master VTH, then select master, and fill in room no.
Note:
VTH “room no.” must match “VTH short no.” in VTO WEB interface.
Figure 4- 2
To Next Page
Loading...
