Dahua VTH5321GB-W - Page 18

12
VTO as SIP server
Select Enable next to SIP Server. Step 1
Select VTO from the Server Type drop-down list Step 2
Configure parameters. Step 3
Table 4-1 SIP server configuration
Parameter
Description
IP Addr.
The IP address of the VTO which works as SIP server.
Port
5060
Username
Keep the default value.
Password
SIP Domain
VDP
SIP Server Username
The user name and password for the web interface of the SIP
server.
SIP Server Password
Click Save. Step 4
The VTO will restart automatically.
Platform (Express/DSS) as a SIP server
Select Network Setting > SIP Server. Step 1
The Device Properties interface is displayed.
Select Express/DSS from the Server Type drop-down list. Step 2
Set parameters according to Table 4-2. Step 3
Table 4-2 SIP server parameter description
Parameter
Description
IP Address
IP address of SIP server.
Port
It is 5060 by default when another VTO works as SIP server.

It is 5080 by default when the platform works as SIP server.

Username/Password
Use default value.
SIP Domain
It shall be VDP when another VTO works as SIP server.

It can be null or keep default value when the platform works as

SIP server.
SIP Server Username/
Password
Username and password to log in to SIP server.
Alternate IP Addr.
IP address of the alternate server.
If alternate server is enabled and Express or DSS works as SIP
server, when Express or DSS cannot work normally, the VTO will
be used as the SIP server.
Alternate Username
Username and password for logging in to the alternate server.
Alternate Password
Alternate VTS IP Addr.
IP address of the alternate VTS.
Alternate Server
Select the Enable checkbox after Alternate Sever, and then
