Dahua G Series - User Manual

Digital Indoor Monitor (Model G)
Quick Start Guide
V1.0
.1

Dahua G Series Specifications

General

Brand	Dahua
Model	G Series
Category	Monitor
Language	English

Summary

Foreword

General Information

Introduces basic operations of the digital indoor monitor.

Device Models

Lists different types of 2-wire VTH models supported.

Safety Instructions

Explains signal words like DANGER, WARNING, CAUTION, TIPS, and NOTE for hazard identification.

Revision History

Details version changes and release dates for the manual.

Privacy Protection Notice

Outlines data collection and privacy compliance requirements for users.

Device Structure

Front Panel Overview

Describes the user interface and components visible on the front of the VTH device.

Rear Panel (2-wire)

Details the ports and connectors on the rear panel for the 2-wire VTH model.

Rear Panel (non 2-wire)

Details the ports and connectors on the rear panel for the non-2-wire VTH model.

Installation Guide

Installation Preparations

Lists precautions and general advice before proceeding with VTH installation.

Wall-mounted Installation

Provides step-by-step instructions for physically mounting the VTH onto a wall.

VTO Configuration

VTO Configuration Tool

Introduces the VDPConfig tool for device configuration and updates.

VTO Initialization

Guides through the initial setup and login process for the VTO.

Configuring VTO Number

Explains how to set a unique number for each VTO for identification.

Configuring Network Parameters

Details how to configure network settings like IP address for the VTO.

Configuring SIP Server

Guides on setting up the SIP server for inter-device communication.

Configuring Call Number and Group Call

Explains how to set call numbers and enable group calling features.

Adding VTOS

Describes the process of adding VTO devices to the SIP server.

Adding Room Number

Details how to add room numbers to the SIP server for VTH connection.

VTH Configuration

VTH Pre-configuration Steps

Prerequisites and planning steps before configuring the VTH.

Quick VTH Configuration

Guides through a simplified initial configuration process for the VTH.

Manual Network Configuration

Details manual configuration of network settings for WLAN and LAN.

Manual SIP Server Configuration

Guides on manually configuring the SIP server parameters on the VTH.

VTH Device Settings

Details how to configure the VTH device's own settings.

VTO Configuration via VTH

Guides on configuring the VTO settings from the VTH.

System Commissioning

VTO Calling VTH

Explains how to initiate a call from the VTO to the VTH.

VTH Monitoring VTO

Details how to monitor the VTO feed from the VTH.

Cybersecurity Recommendations

Essential Security Actions

Covers mandatory actions like strong passwords and timely software updates for device security.

Recommended Security Enhancements

Lists additional security measures such as physical protection, password management, and secure network practices.