Need help?Do you have a question about the Dahua VTH5341G-W and is the answer not in the manual?
General| Display Size | 10.1 inch |
|---|---|
| Operating System | Embedded Linux |
| ROM | 8 GB |
| RS-485 | 1 |
| Alarm Output | 1 |
| Power | DC 12V |
| Power Consumption | ≤ 10W |
| Installation | Wall-mounted |
| Camera | No |
| Video Compression | H.264 |
| Operating Temperature | -10°C to +55°C |
| Weight | 1.5 kg |
| Display Type | TFT LCD |
| Resolution | 1024 x 600 |
| Ethernet | 10/100 Mbps |
| Wi-Fi | 802.11 b/g/n |
| Audio | 2-way audio |
| Operating Humidity | 10% to 90% (non-condensing) |
Details environmental and placement guidelines for safe device operation.
Steps to initialize the VTO device and set initial parameters.
Configuring the VTO's unique number and TCP/IP network parameters.
Setting up the SIP server type and connection details for communication.
Adding door stations and room numbers to the SIP server for system integration.
Initial setup of the indoor monitor, including password and email.
Essential security measures including strong passwords and firmware updates.
To Next Page