16
Add in batch Figure 4-13
All the added room numbers are displayed. Click Refresh to view the latest status, and click
Clear to delete all the room numbers.
Configuring Indoor Monitor 4.4
You need to configure IP, Wi-Fi, door station parameter, SIP server, and more on the indoor
monitor, and then the indoor monitor can communicate with door stations and the management
center.
4.4.1 Initialization
Set password and email.
Password: The password is used when administrators need to go to the project mode.
Email: The email is used when you need to reset the password.
The default IP address of the indoor monitor is 192.168.1.108.
Connect the indoor monitor to power source. Step 1
WELCOME is displayed, and then the initialization interface is displayed.
Enter the password, confirm password, and email. Step 2
Tap OK. Step 3
The main menu is displayed.
To Next Page
Loading...
