Dahua VTH5341G-W - Page 19

15
Add single room number Figure 4-12
2) Configure room information.
Table 4-3 Room information
Parameter
Description
First Name
Enter the information you need to differentiate each room.
Last Name
Nick Name
Room No.
The room number you planned.
 If you use multiple VTH devices, the room number of the master VTH
should be "room number#0", and the room number of the extension
VTH should be "room number#1", "room number#2", and so on.
 You can have 10 extension VTH devices at most for one master VTH.
Register Type
Select public, and local is reserved for future use.
Register
Password
Keep the default value.
3) Click Save.
The added room number is displayed. Click to modify room information, and click
to delete a room.
 Add room number in batch
1) Configure the Unit Layer Amount, Room Amount in One Layer, First Floor Number,
and Second Floor Number according to the actual condition.
2) Click Add at the bottom left of the interface. See Figure 4-13.