38
When Figure 4-28 appears, it means that SD card has been inserted into the indoor
monitor. If SD card is not inserted, the video recording icon and snapshot icon
cannot be used.
You can tap the unlock icon / to unlock doors. If the icons turn grey, the unlock
function cannot be used.
4.5.4 Viewing Alarms Logs
Tap , and then the Alarm interface is displayed. Peripheral alarm modules can be
connected to the indoor monitor. You can view alarm logs, do alarm settings for 6 areas as
needed. There are 7 types of alarms: Infrared, gas sensor, smoke sensor, urgency button, door
sensor, stolen, and perimeter.
Disarm all alarms first, and then you can do alarm settings.
Viewing alarm prompt Figure 4-42
To Next Page
Loading...
