Dahua VTH5341G-W - Page 21

17
Main menu Figure 4-14
Table 4-4 Description of screw hole distances and diameters
No.
Name
Description
1
Room number
Number of the room where the indoor monitor Is installed.
2
Date and time
Current time and date are displayed here.
3
Arm and disarm
Shortcut icons to arm or disarm are displayed here. The four icons
represent at home mode, away from home mode, sleep mode, and
customizable mode. Select Arm Mode or Disarm Mode first, and
then tap the icons to arm or disarm.
4
Status bar
: The wired network is not connected.

: The wired network is connected.

: The indoor monitor failed to be connected to the SIP

server. If this icon does not appear, then the indoor monitor is
connected to the SIP server.
: The SD card is inserted and recognized.

: The indoor monitor is in the Do not disturb mode. It if

disabled by default.
5
SOS
Tap the SOS icon, the indoor monitor will call the management
center.
6
Do not disturb
Tap the icon, and then you can set do not disturb period. You need
to enable DND Period first, and then you can do do-not-disturb