2.2.2 LAN Config
Here you can register VTO to center and set how to call center. Please refer to Ch 3.1.1.
2.2.3 Indoor Station Manager
In Indoor Station Manager interface, you can add VTH (digital indoor station), view VTH
info and delete VTH.
Figure 2- 4
Add VTH
In Indoor Station Manager interface, click on Add. The system pops up a window as in
Figure 2- 5.
Figure 2- 5
Fill in VTH info as user’s name, VTH short no. and IP address.
Note:
VTH short no. consists of four digits, the first two digits can be within 01~99, the last two
digits can be within 01~16.
To Next Page
Loading...
Need help?
General
