Need help?Do you have a question about the Dahua VTO2211G and is the answer not in the manual?
General| Model | VTO2211G |
|---|---|
| Audio | Built-in Microphone and Speaker |
| Connectivity | Wi-Fi, Ethernet |
| System | Embedded Linux |
| Frame Rate | 25 fps |
| Audio Input | Built-in microphone |
| Duplex | Full duplex |
| Alarm Input | 1 channel |
| Tamper Switch | Yes |
| IP Rating | IP65 |
| Installation | Wall-mounted |
| Working Humidity | 10% to 90% (non-condensing) |
| Power Supply | 12V DC |
| Video Compression | H.265 |
| Audio Compression | G.711 |
| Communication Mode | SIP |
| Ethernet | 10/100Mbps |
| Network Protocol | TCP/IP |
| RS485 | 1 |
| Door Control | 1 channel |
| Material | Plastic |
| Working Temperature | -30°C to +60°C |
| Power Consumption | <12W |
Details safe installation and usage requirements for the door station, avoiding hazards.
Specifies requirements for power wires and power supply, including SELV and voltage standards.
Discusses FCC rules, user caution, and radiation exposure limits for safe operation.
Advises against installing the door station in adverse environments like high temperature or direct sunlight.
Outlines the steps for initializing, connecting, and configuring door stations and indoor monitors.
Covers initialization, number/network/SIP configuration, and adding room numbers for door stations.
To Next Page