Need help?Do you have a question about the Dahua VTO2101E-P and is the answer not in the manual?
General| Video Compression | H.264 |
|---|---|
| Audio | Two-way audio |
| Alarm Output | 1 |
| Installation | Surface mount |
| Material | Metal |
| Connectivity | Ethernet |
| Power Supply | PoE (802.3af) |
| Ethernet | 10/100 Mbps |
| Protocol | TCP/IP |
| Alarm Input | 1 |
| Viewing Angle | 90° |
| Operating Temperature | -30°C to +60°C |
Essential security steps for system protection, including password changes and firmware updates.
Guidance on signal words and their meanings to ensure safe operation.
Key requirements for installing and operating the device safely and correctly.
Specifications and guidelines for supplying power to the device.
Important warnings and precautions regarding installation environments and procedures.
Overview of the steps involved in initializing and configuring VTO and VTH devices.
Initial setup process for VTO devices, including setting IP and password.
How to assign a unique number to each VTO for identification and differentiation.
Steps to configure IP address, subnet mask, gateway, and DNS for VTO.
Instructions for setting up a SIP server for inter-VTO communication.
Setting up call numbers and enabling group call functionality for VTOs.
To Next Page